logo

All categories
Number of views:
1000

CYG-MWTA Heat Shrink Medium Wall Sleeving With Adhesive

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
CYG-MWTA
Quantity
-
+
Stock:
0
1
Product manual
Performance
Specifications

Material:
     Outer: irradiation crosslinked modified polyolefin material
     Inner layer: hot melt adhesive
     (Single-wall type thick-walled tube does not involve the inner layer)
Shrink ratio: 3.5: 14: 1
Features:
  • High shrink ratio, the greater the diameter of the quilt was coverage;
  • Black sleeving, has excellent UV resistance;
  semi-rigid walled polyolefin material has excellent electrical insulation properties and mechanical protection properties;
  Minimum fully shrink temperature: 135 ℃.
 
Application:
    High magnification of the polyolefin heat-shrinkable tubing material with good electrical insulation properties and mechanical protection properties, its high rate shrinkage characteristics, particularly suitable for a wide range of sizes harness connection or component connection, the thicker type of wall thickness characteristics, especially for electrical insulation protection and mechanical protection, inner layer of hot melt adhesive in high-voltage power cable connected to the connecting member can play a waterproof seal.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Item Test method Indicator
Range of continuous operating temperature IEC216 -55℃~110℃
Tensile strength ASTM D2671 ≥14MPa
Elongation at break ASTM D2671 ≥400%
Tensile strength after aging ASTM D2671(150℃,168h) ≥12MPa
Elongation at break after aging ASTM D2671(150℃,168h) ≥300%
Volume resistivity IEC93 ≥1.0x1014 Ω· cm
Breakdown strength IEC243 ≥20kV/mm
Copper stability ASTM D2671 by
Axial shrinkage UL224 0~10%
Concentricity rate ASTM D2671 ≥65%
Cracking resistance ASTM D1693(50℃) No cracking
Water absorption ISO62(23℃,14day) ≤0.2%
  Hot melt adhesive (single-wall type sixfold thick-walled tube does not involve)  
Softening Point ASTM DE28 85℃
Peel strength(PE) DIN30672 ≥4N/cm
Copper stability ASTM D2671 No corrosion
Antibacterial ISO846 by

Specification Product inner diameter(mm) After shrinking the inner diameter(mm) Wall thickness after shrinking(mm) Standard length(mm)
8/2 ≥8 ≤2 ≥1.7 1220
12/3 ≥12 ≤3 ≥2.0 1220
16/5 ≥16 ≤5 ≥2.2 1220
19/5 ≥19 ≤5 ≥2.2 1220
22/6 ≥22 ≤6 ≥2.5 1220
28/6 ≥28 ≤6 ≥2.5 1220
33/8 ≥33 ≤8 ≥2.7 1220
40/12 ≥40 ≤12 ≥2.7 1220
45/12 ≥45 ≤12 ≥2.7 1220
55/16 ≥55 ≤16 ≥2.8 1220
65/19 ≥65 ≤19 ≥3.0 1220
75/22 ≥75 ≤22 ≥3.0 1220
85/25 ≥85 ≤25 ≥3.0 1220
95/25 ≥95 ≤25 ≥3.0 1220
115/34 ≥115 ≤34 ≥3.0 1220
140/42 ≥140 ≤42 ≥3.0 1220
160/50 ≥160 ≤50 ≥3.0 1220
180/58 ≥180 ≤58 ≥3.0 1220
205/65 ≥205 ≤65 ≥3.0 1220
tel

Copyright © 1993-2021 Changyuan Electronics (Dongguan) Co., Ltd.    粤ICP备15087348号